Calibration Services
ISO/IEC 17025 Accredited Measurement
Alternate Systems can support your work by providing quality ISO 17025 and IEC 17025 accredited measurement calibration of many items used in manufacturing, plating and surface finishing, electronics, electronic assembly, printed circuit board fabrication, logistics, cold chain, and pharmaceuticals.
Alternate Systems can support your work by providing quality ISO 17025 and IEC 17025 accredited measurement calibration of many items used in manufacturing, plating and surface finishing, electronics, electronic assembly, printed circuit board fabrication, logistics, cold chain, and pharmaceuticals.
Many of our calibrations are completed automatically with Fluke’s MET/TEAM and MET/CAL system. We are always adding capabilities and here is a list of some of the devices we can calibrate:
Who Needs Calibration Services
Nearly every industrial or commercial site has testing equipment calibration needs and Alternate Systems is their one-stop shop.
Types of Equipment We Calibrate
Alternate Systems provides all kinds of test equipment calibration and services. Here’s a small menu list of just some equipment calibrate.
- Alloy Conductivity Measuring Instruments and Standards
- Balances
- Calipers
- Coating Thickness Gauges
- Coating Thickness Standards
- Cubiscans
- Data Loggers
- Dial Indicators
- Digital Multimeters (DMMs)
- Digital Thermometers
- Dimensional Measuring Tools
- Ferrite Measuring Instruments and Standards
- Flaw Detectors
- Floor Scales
- Gage Blocks
- Gauss Meters
- Lamination Presses
- Liquid in Glass (LIG) Thermometers
- Hot Roll Laminators
- Humidity
- Micrometers
- Multimeters
- Oscilloscopes
- Ovens
- pH Meters
- Power Supplies
- Pressure Gauges
- PRTs
- Rectifiers
- Remote Sensors
- RTDs
- Rulers
- SCADA Systems
- Scales
- Tachometers
- Tape Measures
- Temperature Controllers
- Thermo-hygrometers
- Thermometers
- Thermocouples
- Timers
- Thread Gages
- Thread Ring Gages
- Torque Analyzers
- Torque Tools
- XRF Coating Thickness Gauges and Standards
- Risk Assessment
- Protocol Development
- Test Design
- Design Qualification (DQ)
- Installation Qualification (IQ)
- Operational Qualification (OQ)
- Performance Qualification (PQ)
- Environmental Mapping
- Alloy Conductivity Measuring Instruments and Standards
- Balances
- Calipers
- Coating Thickness Gauges
- Coating Thickness Standards
- Cubiscans
- Data Loggers
- Dial Indicators
- Digital Multimeters (DMMs)
- Digital Thermometers
- Dimensional Measuring Tools
- Ferrite Measuring Instruments and Standards
- Flaw Detectors
- Floor Scales
- Gage Blocks
- Gauss Meters
- Lamination Presses
- Liquid in Glass (LIG) Thermometers
- Hot Roll Laminators
- Humidity
- Micrometers
- Multimeters
- Oscilloscopes
- Ovens
- pH Meters
- Power Supplies
- Pressure Gauges
- PRTs
- Rectifiers
- Remote Sensors
- RTDs
- Rulers
- SCADA Systems
- Scales
- Tachometers
- Tape Measures
- Temperature Controllers
- Thermo-hygrometers
- Thermometers
- Thermocouples
- Timers
- Thread Gages
- Thread Ring Gages
- Torque Analyzers
- Torque Tools
- XRF Coating Thickness Gauges and Standards
- Risk Assessment
- Protocol Development
- Test Design
- Design Qualification (DQ)
- Installation Qualification (IQ)
- Operational Qualification (OQ)
- Performance Qualification (PQ)
- Environmental Mapping
Validation Services
Alternate Systems provides validation services too. Alternate Systems is also an ISO/IEC 17025 accredited calibration and testing laboratory with 21 CFR Parts 210/211 validation capabilities. We can deploy hundreds of data loggers to environmentally map almost any space to document GMP compliance in FDA-regulated environments and help you understand and reduce your risk.
No need to search any further. Please contact us to request a quote or place your new order for your company today. If you prefer, call us at (800) 928-9729.
Many of our calibrations are completed automatically with Fluke’s MET/TEAM and MET/CAL system. We are always adding capabilities and here is a list of some of the devices we can calibrate:
Who Needs Calibration Services
Nearly every industrial or commercial site has has testing equipment maintenance needs and Alternate Systems is their one-stop shop.
Types of Equipment We Calibrate
Alternate Systems provides all kinds of test equipment calibration and services. Here’s a small menu list of just some equipment calibrate.
Validation Services
Alternate Systems is more than just an accredited calibration and testing laboratory.
Alternate Systems is also an ISO/IEC 17025 accredited calibration and testing laboratory with 21 CFR Parts 210/211 validation capabilities. We can deploy hundreds of data loggers to environmentally map almost any space to document GMP compliance in FDA-regulated environments and help you understand and reduce your risk.
No need to search any further. Please contact us to request a quote or place your new order for your company today. If you prefer, call us at (800) 928-9729.